The HEC120IPPRO is equipped with advanced MJPEG video processing and IP protocol to deliver full HD 1080p video up to 120m(390ft) over single CAT6 cable.
The HEC120IPPRO can be used to extend HD video to a single display (point-to-point) by connecting the HEC120IP-TX Transmitter to the HEC120IP-RX Receiver unit.
For multi-display systems connect the Transmitter and multiple Receivers to a Gigabit Ethernet switch and 'mirror' the Source to many Display devices - ideal for Digital Signage, Sports Bars, House of Worship, Education and Hospital applications requiring multiple displays over longer distances using an existing LAN infrastructure. For each additional HD display, one HEC120IPV3 receiver is needed and can be purchased sepeartely.
Features
New 1080P HDMI Extender Kit over IP by SINGLE CAT5 CAT5e CAT6 CABLE.
supports FULL HD 1080P UP TO 120m over single CAT6
Follow the standard of IEEE-568B,Auto-adjustment of feedback, equalization and amplify
use single Ethernet cable to connect the HDMI source devices (such as HD camera, Blu-ray, Cable Box etc) to HDMI display for longer distances, up to 120M (390ft) using Cat6 cable, 100M (320ft) using Cat 5e cable or 80M (320ft) using Cat5 cable for 1080P
HDCP compliant
support a Point-to-Point connection via CATx
supports a Point-to-Many connection via a Gigabit Ethernet network switch. Support for multiple transmitters requires a managed Gigabit Ethernet network switch.
supports 480i@60Hz,480p@60Hz,576i@50Hz, 576p@50Hz,720p@50/60Hz,1080i@50/60Hz, 1080p@50/60Hz
Support Multichannel Audio Formats Including Dolby Digital Plus, 7.1 LPCM, Dolby TrueHD and DTS Master Audio
Easy installation
Only requires 1 CAT5/CAT6 Cable
Supports HDMI and HDCP
What's in the box
1x HEC120IPPRO Receiver Unit
1 X X 5V UK 3pin power supply
User Manual
Signal-HD HDMI to IP converter enables the user to connect remote ( to 120 m) source of HD content to HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units, as well as remote control extender for a Blu-ray/DVD player, STB etc.
Transmission via a single Cat. 5e/6 cable
UDP/IP protocol (multicast)
Possibility of point-to-multipoint topology
Support for 1080p mode
Maximum length of cable: 120 meters
Remote control extender
IP signal coming from the transmitter may be applied to an Ethernet switch to split it among multiple receivers. The bit rate of the compressed signal at the output of the transmitter is about 30 Mbps. The output signals can be properly decoded only by the dedicated receivers - it cannot be done by a PC equipped with a network card.
The set is perfect for connecting remote HD source like sat receiver, Blu-ray player, PC, game console etc. to HD-enabled TV/monitor/projector. It requires to use only one, comparatively thin cable, which makes it easy to hide it, e.g. when installing the TV/monitor on an LCD/plasma mount.